AquaArm Saniflex
Elastomeric waterproofing liquid Applied membrane for wet rooms
₹5,125.0025 Kg + GST ( 18 % )
Fast Shipping
400+ Products
Technical Support
Trusted Quality
Description
AquaArm Saniflex is a liquid applied, ready to use, synthetic rubber-based polymer dispersion which dries to form a seamless elastomeric waterproof membrane. The waterproof membrane provides a breathable yet waterproof elastomeric barrier with crack bridging properties.
Features and Benefits
- Easy to apply single component.
- Single application possible, reducing working steps.
- Seamless, Breathable waterproof membrane system.
- Fast curing allows tiling on same day.
- Excellent crack bridging properties.
Uses
- Wet rooms such as shower areas, bathrooms, kitchens
- Sanitary areas in public and private buildings.
Packaging
25 Kg Bucket
Consumption
Technical Data
| Property | Value |
|---|---|
| Density | 1.3 – 1.4 kg/Lit @ 27°C |
| Tensile Strength | 1.6 N/mm at 30°C |
| Elongation | 100% |
| Recoatable (Open to Tiling) | 5 hours at 30 30°C |
| Crack Bridging | > 0.75 mm @ 0.8 mm dft |
Application Methodology
Surface Preparation
All surfaces to receive AquaArm Saniflex should be clean, sound, dry and free from grease, oils, curing membranes, laitance, and any loose particles to ensure good adhesion. In accordance with the ZDB Code of Practice recommendations, surfaces should be smooth and fine textured with undulations leveled off where possible. Concrete and cementitious substrates should be at least 5 days old.
Priming
Where necessary to seal off dust and cohesiveness to improve the substrate, use AquaArm UniPrimer -GE. It is recommended that AquaArm Saniflex be applied at a rate of1.2 kg/m2 once the primer is dry.
Application
Prior to the application of AquaArm Saniflex, it is recommended that all construction joints, upstands (wall/floor joints), pipe inlets and outlets are sealed with SealArm Joint Tape.
AquaArm Saniflex is used to fix SealArm Joint Tape to the wall/floor joints, including overlaps, internal/ external corner pieces and sealing of pipe inlets and outlets. Apply AquaArm Saniflex by brush, roller or notched trowel. For a single application, use a 3 mm notched trowel to evenly spread AquaArm Saniflex followed by smoothing with a roller
For brush or roller applications, two coats are recommended. The first coat should dry (3 hours at 40°C) before the second coat is applied. Once the final AquaArm Saniflex layer/coat is dry tiling can commence using a polymer modified tile adhesive such as UNIFIX, MONOFLEX or UNIFIX-2 K
Health & Safety
AquaArm Saniflex is none hazardous. When in doubt refer to relevant Material Safety Data Sheet. Please refer to local environmental laws for modes of disposal.
Reviews
Clear filtersThere are no reviews yet.