MYK Arment AquaArm 2CP i, 30 Kg, Acrylic Polymer Cementitious Waterproofing for Wet Areas, Teraces
₹3,000.00 + GST ( 18 % )
MYK Arment AquaArm Power Prufe 800, 1.2mm Thick HDPE Membrane
₹8,160.00 + GST ( 18 % )
MYK Arment AquaArm IC, 25Kg, Crystalline Waterproofing Coating for Concrete
₹2,750.00 + GST ( 18 % )
17
People watching this product now!
Fast Shipping
400+ Products
Technical Support
Trusted Quality
Reviews (0)
Description
MYK Arment AquaArm IC is a one-component crystalline waterproofing Coating designed to penetrate and waterproof new or old, structurally sound concrete. Its active crystalline technology penetrates deep into the concrete pores and capillaries to help block water penetration and protect concrete against moisture.
MYK Arment AquaArm IC is suitable for concrete waterproofing, water-retaining structures, basements, foundations, tanks, and other concrete structures where long-lasting waterproof protection is required.
Features& Benefits
- Penetrates the capillaries deep in concrete.
- Can be applied to Damp Surfaces
- Self-heal Cracks up to 0.4 mm.
Uses of AquaArm IC
- Exterior and interior waterproofing in below grade structures i.e. Basement Raft & retaining wall, lift pits, foundations.
- Water Tanks, Waste Tanks, STPs, Manholes, Tunnels.
Packaging
25 Kg Bag
Consumption
Approx. 1.5 Kg Per Sq.M. in two coats.
Technical Data
| PROPERTIES | RESULTS |
|---|---|
| Basis | Sand/cement, inorganic |
| Bulk density | 1.1 kg/litre |
| Pot life (at +23°C / 60% RH) | 30 minutes |
| Setting Time (at +23°C / 60% RH) | 45 minutes |
| Water impermeability | No measurable leakage up to 460 ft (140 Mtr / 14 bar), negative or positive side |
Storage and Shelf Life
Best before 6 months from the date of manufacture, when stored in cool and dry place at original, unopened condition.
* To know about Application method, Limitations and Safety, please refer Technical Data Sheet (TDS).
Reviews
Clear filtersThere are no reviews yet.