MYK Arment AquaArm 2CP i, 30 Kg, Acrylic Polymer Cementitious Waterproofing for Wet Areas, Teraces
₹3,000.00 + GST ( 18 % )
Fast Shipping
400+ Products
Technical Support
Trusted Quality
Description
MYK Arment AquaArm 2CP i is a two component Acrylic Polymer modified Cementitious system for waterproofing of wet areas and any water retaining structures such as swimming pools and water features.It also used for waterproofing old Covered Terraces & Roofs.
Features of AquaArm 2CP i
- Seamless, Breathable membrane, Water potable
- Elastomeric, High film build-up, Low VOC.
- Excellent adhesion to concrete and masonry substrates.
- Can be applied on damp surfaces.
Uses
- AquaArm 2CP i is used at any concrete, cement or masonry surface that are subject to moisture ingress.
- Swimming pools, water features and water tanks.
- Bathrooms, toilets, balconies, planters etc.
Packaging
30 kg Composite Pack
Powder : 20 kg
Liquid : 10 kg
Consumption
Appox. 2 Kg per Sq.M. in 2 coats
Technical Data
| PROPERTIES | RESULTS |
|---|---|
| Mix ratio (liquid: Powder) | 1:2 |
| Inter coat application time, Hrs | 6-8 |
| Cure time after 2 coat, days | 7 |
| Tensile strength, N/mm² | 0.8 |
| Elongation at break, % | 100 |
| Crack bridging | No cracking up to 1.2 mm |
Application Methodology of MYK Arment AquaArm 2CP i
Step no 1: Surface Preparation
The substrate must be sound, clean and free from dirt, oil and loose material.
Masonry surfaces should be fully cured (minimum 28 days) prior to application
All surface cracks, undulations and voids must be repaired before application using a suitable repair material.
Substrates must be Saturated surface dry (SSD) prior to application.
Step no. 2: Mixing Instructions
Allow the mixed slurry to stand for 5–10 minutes before use.
Do not dilute with water.
Step no. 3: Product Application
Allow the first coat to dry completely for 6 – 8 hours before applying the second coat
Apply second coat at right angles to the first coat.
Health & Safety
- AquaArm 2CP i is a water based emulsion of non hazardous polymer.
- It is non flammable and essentially non toxic.
- Normal industrial hygiene procedures should be adhered to particularly when spraying and it is recommended that gloves and eye protection be worn.
- In case of skin or eye contact thoroughly irrigate with water and seek medical advice if any irritation develops or persists.
- In the case of accidental ingestion, wash mouth out with water and seek medical attention.
- Spillages should be cleaned up immediately with water as they will leave a film on evaporation.
- See MSDS for further information.
Precautions & Limitations
- Do not add water to AquaArm 2CP i during application.
- It needs at least 3 days for water or moisture curing. Cure with help of moist hessian cloth.
- Concrete & masonry surfaces must be cured for 28 days before application.
- Overlay of a cementitious screed must be done with 7 days hrs after completion of coating. If applied in wet areas & bathrooms.
Storage and Shelf Life
- Best before 12 months from the date of manufacture, when stored in cool and dry place at original, unopened condition.
Reviews
Clear filtersThere are no reviews yet.