AquaArm Super Coat
Water based coloured Waterproof coating
₹5,255.0025 Kg Bucket + GST ( 18 % )
Fast Shipping
400+ Products
Technical Support
Trusted Quality
Description
It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them waterproof. The coating is UV stable and highly reflective with high flexibility
Features and Benefits
- Single component, UV stable, seamless application.
- Breathable, cures to give a permanently flexible and resilient surface resistant to a wide range of temperatures.
- Can be used on wet surfaces and during the rainy season.
Uses
- Roof chajjas, parapet walls and external walls.
- Asbestos cement sheets roofs can also be waterproofed using scrim cloth or Aso Joint Tape at the junctions, overlaps, and J-bolts as reinforcement.
- As a damp proof course applied under the first layer of bricks or blocks in masonry works.
Packaging
25 kg Bucket
Coverage
Appox. 2 – 2.2 Sq.M. per Kg
Technical Data
| Properties | Results |
|---|---|
| Solid (%) | 65% |
| Elongation | > 100% at 1 mm thickness |
| Tensile Strength (N/mm²) | > 0.7 N/mm² |
| Crack Bridging Ability | Up to 1.5 mm |
| Pull Out Bond Strength (N/mm²) | > 0.7 N/mm² |
Application Methodology
Step no 1: Surface Preparation
The concrete surfaces should be thoroughly cleaned and free from laitance, dust, dried algae, loose material, oil, grease, etc. Old/repainted surfaces must be thoroughly cleaned by mechanical means such as wire brushing and/or by high pressure water jet cleaning.
All surface cracks more than 2 mm and up to 5 mm width should be filled with Crack Filling Compound or ReArm Crack Fill paste/powder as appropriate. Cracks more than 5 mm and all separation gaps should be filled with Rearm Bond Latex modified mortar or as specified after opening the crack to a “V” cut.
Step no 2: Priming:
For Primer dilute one part by volume of AquaArm Super Coat with one part of clean water and apply with a brush evenly on the surface.
Step No. 3: Application of AquaArm Super Coat:
Use AquaArm Super Coat directly from the container. Stir contents well before use. For Top Coating: Two Coats are recommended. When the primer coat is touch dry apply the first coat of AquaArm Super Coat. The second coat is to be applied perpendicular to the first coat within one hour or when the first coat is tack free, to ensure uniform masking & even finish.
Do not undertake any further work over the coated area within 72 hrs of final coat. Allow the coated surface to air cure fully for 7 days.
Note
Protect the painted surface from rain or dust at least for 8 hours. When rain is expected, do not initiate the application.
Health & Safety
Use of hand gloves is necessary while mixing the Product In case of contact with skin or eyes, use plenty of water to wash and obtain medical helps immediately
Reviews
Clear filtersThere are no reviews yet.