SP-100
Stain-free Grout
₹2,850.005 Kg Pack + GST ( 18 % )
Fast Shipping
400+ Products
Technical Support
Trusted Quality
Description
Product Description
Stain-free epoxy grout for interior & covered exterior floor & wall
Uses
- Designed especially for interior and covered exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, metal tiles, precast terrazzo, engineered stone floors and natural stones. Recommended for Institutional and commercial kitchens, Cafeterias, residential facilities, Rest rooms, Schools and wet areas like swimming pools, sauna, water bodies and
washrooms
Packaging
SP-100 is a factory proportioned kit with Hardener (Part A), Resin (Part B), and colored filler powder (Part C).
Unit Net weight
1/5th unit 1.0 kg
1 full unit 5.0 kg
Double unit 10.0 kg
Colour
Choose from range of colours available in Part C filler powder. Please refer the grout colour chart for choosing the colour required.
Technical data
- Applicable Standards: ANSI A118.3; ISO 13007 – 3 (RG) / EN 13888
| Test | Test Method | Results |
|---|---|---|
| Compressive Strength | ANSI A118.6-1999; H 4.5 | 3050 psi (21.0 MPa) |
| Linear Shrinkage | ANSI A118.6-1999; H 4.3 | < 0.1% |
| Tensile Strength | ANSI A118.6-1992; H 4.6 | 400 psi (2.7 MPa) |
| Flexural Strength | ANSI A118.6-1992; H 4.7 | 800 psi (5.5 MPa) |
Shelf Life
- Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >50°F (10°C) and <95°F(35°C) under shed, away from direct sunlight.
Coverage
- Please refer the coverage chart as it depends on the tile size, joint width and depth.
Working Properties at 70° F (21° C)
| Pot life | 45 minutes |
| Foot traffic | 24 hours |
| Heavy traffic | 72 hours |
Features and Benefits
- Stain-free
- Colour fast
- Easy to clean
- Chemical and Temperature resistant
- Non-cracking or powdering
- Anti-Bacterial and anti-fungal
- Water and shock resistant.
- Food grade – Certified by CFTRI, Mysore
Health and Safety information
- Use goggles and hand gloves and mask during application.
- Clean hands with warm soap water after application.
Limitations
- Light colors may darken slightly from direct UV exposure.
Consult with Technical Services for specific exterior grouting recommendations. - For industrial applications exposed to high concentrations of food and mineral acids and to high heat, use LATAPOXY®2000 Industrial Epoxy Grout.
- Maximum stain resistance is achieved 10 days after installation. Protect from exposure to acids and strong cleaners during this period.
- Not recommended for soft, polished marble or delicate glazed tiles.
- Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproof membranes. When a waterproof membrane is required, use LATICRETE® Hydro ban/ 9237 Waterproof Membrane.
Maintenance
- LATICRETE® and LATAPOXY® grouts require routine cleaning with neutral pH soap and water or MYK LATICRETE Clenza series suitable cleaners. All other LATICRETE® and LATAPOXY® materials require no maintenance but proper installation as per instruction.
Performance and durability may depend on properly maintaining of Installed area.
Application Methodology
- It is recommended to check the colour of the grout, if it is meeting the desired colour of the client.
- It is recommended to do a small area with actual tile/stone at site and check for any colour ingress into the tile/stone. Many tiles / stones have high absorption which may lead to discoloration / colour marks.
- Plan to provide proper movement joints, peripheral joints as per EJ 171 to accommodate movements in tile/stone and use flexible grout / sealant to fill these movement joints.
- SP-100 is a solid epoxy grout and does not accommodate movements in tile/stone that can occur due to various reasons. Movements which occur in the tile/stone area due to non provision of movement joints will lead to cracks / breakage of grout joints / tile/ stone.
- Keep the working area covered and protected from Sun light while application of SP-100, stain free epoxy grout, is applied in open areas like swimming pools etc. Keep the cover for 7 days and till the filling of pools with water after the completion of grouting with SP-100, stain free epoxy grout.
Surface Preparation:
Before starting to grout, remove debris in grout joints and lightly sponge the tile surface to remove dust and dirt. Do not clean tiles with acid cleaners. In case acid cleaners were used to clean the tiles, ensure to wash the area with plenty of water before commencing grouting. Substrate temperature must between 60°F (16°C) and 90°F (32°C).
Mixing
Empty entire contents of SP-100 Stain free Grout Part “A” and Part “B” container into a clean mixing pail. Mix with a margin trowel or a slow speed drill mixer until liquids are completely blended. Add at least ¾ of SP-100 Part “C” Filler Powder and mix to a uniform consistency. Add the remaining filler powder and mix to achieve a stiff mix to work into the joints.
Immediately pour entire contents of bucket onto working area. Use a plastic sheet as a drop cloth. Use standard epoxy grouting techniques to work with SP-100 Grout into tile joints. SP-100 Grout can also be applied with a caulking gun. Be sure all grout joints are packed full with SP-100. Remove as much excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tiles.
Cleaning
Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90° angle and pull it diagonally across the joints and tile to avoid pulling out the material.
Initial Cleaning: After 30–45 minutes of the application of the grout, scrub the surface of the tile & joint with clean water and scrubber provided to remove any excess grout. Then take a clean thick white towel and drag across the tile to remove any residue.
Final Cleaning: Within 24 hours, do a second cleaning with normal soap detergent to remove any haze from the tile.
*Contact MYK LATICRETE technical services for large format tile or stone installations on exterior surfaces.
Reviews
Clear filtersThere are no reviews yet.